SwingPerefect Golf 5 Level Golf Tee Height Setter.

Here is a question almost nobody answers honestly: across your last round, 18 holes and roughly 14 drives, how high did you actually tee the ball each time? Almost certainly not the same. On the first hole you were loose and teed it up a little higher. By the third the grass was longer, so it went in shallower. On the seventh you were rushing and just poked it into the ground. By the back nine you had no idea what you were doing. Tee height decides exactly where the face meets the ball. Too high, and the strike creeps above center, the flight balloons, spin goes haywire and distance actually drops. Too low, and the strike drops to the lower face or the turf behind the ball, giving a flat, dead, directionally loose shot. You paid for a custom shaft. You were fitted for the head. Then, seconds before impact, you handed the most basic variable in the equation back to feel.

This 7.1 cm, 9.7 gram plate exists to end that. Clip a tee into any stop from 1 to 5, hold the tool vertically over the turf, press until the base touches the ground and stops, lift it away, and the tee height is locked. Grass length, soil softness and how hard you push have nothing to do with it anymore. Low stops for precise iron strikes, the middle stop for fairway woods and hybrids, stop 4 for a high driver flight and stop 5 for maximum distance. Best of all, it retires that bag of random, mismatched tees. One plate, five heights, 9.7 grams, lighter than your keys, and it slides into a scorecard holder or a pocket without a thought. Starting with your next round, stop guessing where the ball sits.

• Stop feeling your tee height. Set it on a stop.

• A 9.7-gram plate that retires your whole bag of mismatched tees.

• Tee height is a number now, not a mood.

1. Five Fixed Stops Where the Stop Is the Height. No eyeballing, no finger measuring, no trying to remember yesterday. Pick the stop, press to ground contact, and the tee height comes out identical every time.

2. 7.1 × 3.3 × 0.7 cm and 9.7 g, Practically Weightless. Smaller than a business card and lighter than your keys, it disappears into a scorecard holder, bag pocket, cap compartment or trousers, so it is genuinely always with you.

3. The V-Slot Holds the Tee So It Cannot Lean. Two angled walls clamp the shaft through a fully vertical press, so the tee does not end up crooked the way hand-inserted tees do, and ball position stops drifting by millimeters.

4. One Tool Replaces Five Tee Lengths. Stop buying and juggling three different tee lengths. One batch of tees plus five stops covers everything from irons through driver.

5. Premium ABS in Matte Black That Survives Everything. One-piece molding resists impact, pressure, sun and rain, and repeated pressing into firm turf will not crack or deform it. A year from now it is still the same plate.

HOW TO USE

1. Step 1: Pick a Slot. Choose the stop that matches the shot you want. Use stop 1 for precision iron strikes, stop 2 for standard irons, stop 3 for fairway woods and hybrids, stop 4 for a high-launch driver and stop 5 for maximum driver distance. The numerals sit on the front face and remain readable through a glove.

2. Step 2: Clip the Tee. Push the tee shaft sideways into the chosen V-slot until it seats against the bottom of the notch. The angled walls center the shaft automatically, so no careful alignment and no second hand are required.

3. Step 3: Push Until It Stops. Hold the curved grip end, keep the body perpendicular to the ground, and press down into the turf until the flat base edge fully contacts the ground and cannot go further. The exposed tee height is now locked.

4. Step 4: Lift Straight Up. Draw the tool straight up along the tee axis so the tee slips out of the V-slot and stays in the ground. Do not rock or pull at an angle, or the freshly set tee will be dragged off vertical.

5. Step 5: Tee Up and Play. Place the ball on the tee and hit the shot you planned. When you change clubs, repeat Step 1 with a new stop. To stay consistent through a round, keep the same stop and repeat the operation, and consider recording your personal stop-to-club mapping during practice.