SwingPerfect Golf 2-in-1 Rotatable Putting Rail with Stance Board.Practicing putter face alignment means nothing if your stance and ball position drift on every rep. This 2-in-1 carbon fiber system locks in both start-line direction and body posture simultaneously.
"Direction + Stance 2-in-1: lock in your stroke line and foot address in one step."
"360° turf rotation: micro-adjust putting lines on breaking greens instantly."
"105g carbon fiber precision: 18 training tees forge tour-level start lines."
1. Innovative 2-in-1 Alignment System (Face Squareness + Stance): Pairs a 78.7cm putting rail with an 18cm perpendicular stance board, ensuring your eyes, shoulders, ball position, and putter face align to the exact same geometric baseline.
2. 360-Degree Stepless Turf Rotation: Anchored by 2 ground pins, the rail smoothly swivels 360° on outdoor greens without pulling tees out of the turf—calibrating subtle break angles and downhill lies in seconds.
3. 100% Lightweight Rigid Carbon Fiber (105g Total Board Weight): Resilient composite construction guarantees the 78.7cm rail lays perfectly flat without bending or warping, even in high humidity or direct sunlight.
4. 18-Piece Practice Tee Gate System: Integrated apertures allow golfers to construct custom start-line gates; an impact error of just 1° clips the tee, building elite muscle memory.
5. Includes 81cm Custom Leather Travel Sleeve: The entire system weighs only 242g packed in its tailored protective leather sleeve, fitting effortlessly into bag umbrella slots or side pockets.
How to Use
① Combined Training (Recommended) — Direction + Stance in One Setup
Lay the rail flat along the target line pointing at the hole or target center.
Place the stance board across your stance position between the feet, front-end ball marker aligned with the ball position.
Stand with feet on either side of the board; place the ball at the front-end marker.
Set up and check in order: stance line parallel to the target line (board reference) → ball position fixed (front marker) → neck bend → rail center line pointing straight at the target.
Putt along the rail and read the ball path — build a unified address where posture is fixed and direction is straight.
② Rail Standalone — Straight-Line Calibration + Multi-Angle Rotation
Lay the rail flat along the target line pointing at the hole or target center.
Place the ball at the ball-position hole; set up and check whether the rail's center line points straight at the target — if it looks left/right, adjust in order: distance to the ball, neck bend, ball position.
Putt along the rail and watch whether the ball rolls straight — correct immediately.
Multi-angle: insert one locating pin into the small hole above the ball-position hole into the ground; flick either end of the rail to rotate to any target direction; putt continuously at multiple directions (start at 12 o'clock, rotate 30-45° each time, change distance after a full circle).
③ Stance Board Standalone — Ball Position + Backswing Arc Control
Lay the board flat at the ball position, front-end marker aligned with the ball (either end works).
Confirm ball-to-marker alignment before every stroke for a consistent ball position.
Use the 18cm board length as a backswing arc reference: keep the backswing within the board for consistent amplitude.
Chipping/swing drill: place the ball in front — the board becomes a T-shape alignment tool for chipping stance and ball position.
④ Advanced Combo Drills
Pair with cups, gates, direction strings, and other aids to build a complete training system.
After putting is dialed in, use the stance board for chipping ball position and posture — short game improves together.
With long-term use, maintain correct stance, ball position, and aim even without the tools.
