SwingPerfect Right Hand Golf Putting Face Path Template 12 Arc Trainer. Why do your putts always slip by the lip on clutch putts? Biomechanics shows that over 80% of putting direction is dictated by your face angle at impact—miss by just 1 degree and your putt is doomed! This blue-grid template combines a natural 12° arc with a center red line and physical face-control peg holes, catching any wrist twist or face flaw the instant you strike the ball!
Center line prevents, control pegs verify: Your face angle has nowhere to hide.
Square the face on the 12° arc: A training board that never compromises on impact.
Lock down impact face squareness and drain short putts with total confidence.
1. Center Red Line + Face Peg Holes — Double-Locked Face Squareness: Square your face against the red line at address (stops bad setup habits), and stroke between side tees that block wrist flipping through impact!
2. Clean Blue-Grid Engineering Layout: High-contrast blue lines on black eliminate visual clutter, allowing you to focus completely on keeping your putter face dead square throughout the stroke.
3. Dual Tee Gates Test True Start Lines: Front tee gates set at 5cm demand pure face squareness—if your face is off by half a degree, the ball clatters into the tees immediately!
4. 12° Natural Putting Arc: Matches natural shoulder rotation around an inclined spine, eliminating stiff robotic lines and making a square face feel completely effortless.
5. Includes an EVA Hard Zipper Case + 18 Tees: Rolls smoothly into a protective hard travel case that prevents creases, unrolling completely flat in your home, office, or putting green.
6. OEM Ready — MOQ 100 Pieces Custom branding and OEM orders welcome — ideal for golf retailers, teaching academies, practice facilities, and premium gifting programs.
How-To Instructions:
Unroll & Position: Lay the template flat on an indoor putting mat or practice green with the 12° arc curve facing your stance; anchor corners with tees on outdoor greens if desired;
Setup & Address Prevention: Align the putter face flush against the perpendicular center red line to guarantee dead-square face orientation at address;
Insert Closed-Loop Pegs: Insert tees into the face-control holes flanking the impact zone, and insert two white tees into the forward 5cm or 6.5cm tee gate holes;
Execute & Verify: Stroke smoothly along the 12° arc; the putter head must pass through the face pegs without contact, and the ball must roll cleanly through the front tee gate;\n
Pack & Store: Remove the tees into the accessory pouch, roll the template loosely, and zip inside the protective hard case.
Size & Weight: 80x20cm,250g Hard Case Package:36x9x6cm, 450g
