top of page

SwingPerfect Golf Putting Gate Training Set.


From 7 centimetres to 5. That is what progress looks like. Where the face cannot explain itself, the gate leg will. Same height every time. Only the hole gets smaller.


You know your putting is not steady, but you cannot say exactly why. The ball goes right sometimes, left other times, and occasionally it looks perfect and still misses. You suspect the face, then the path, then maybe you just aimed wrong. None of it is visible during the one second and a bit of the stroke, so you change things by feel and still have no idea whether you fixed anything.


These gates solve the part you cannot see.


Stand a gate thirty centimetres in front of the ball and roll a putt through it. The ball has to pass through the middle without touching either leg. Hit the right leg and the face was open at impact; hit the left and it was closed; pass through but watch the ball drift and the path is cutting across. The gate does not explain anything, it just puts the result in front of you, and that result is hard to argue with because the sound of an metal leg is very honest.


The three openings are 7, 6 and 5 centimetres. Seven is for warming up and finding your hands. Six is where it starts holding you to account. Five is where it gets real, because a golf ball is 4.27 centimetres across, which leaves you a little over three millimetres on each side. When you can send the ball through that one repeatedly, the cup on the course starts looking bigger.


All three stand at the same 9.5 centimetres, and only the opening shrinks. That was deliberate. If the height shrank with the width, every gate change would force you to re-adapt to how the ball looks inside it, and you would never know whether your direction got worse or you just were not used to it. This way you only ever deal with one thing at a time: the hole got smaller.


Assembly is almost impossible to get wrong. Push each leg into its red base, press until it seats, put it down and putt. The frames are metal, two millimetres thick, and those little 20 gram red bases are what keep a thirty-odd gram plate standing up in turf and shrugging off a glancing ball. The whole set is about a hundred and seventy-five grams, comes apart into a flat stack, and drops into a side pocket. Putting mat in the living room, the practice green, a real green, either hand. Bring your own ball and putter.


It will probably sting at first, discovering that you cannot even get through the seven centimetre gate. That is the point. You are finally seeing the real number. Then work your way up one gate at a time, and that road should last you most of a winter.


1. Three openings, one visible line of progress: seven centimetres builds confidence, six builds consistency, five chases precision, and one set carries you through a whole winter without buying anything else.


2. Same height, only the opening shrinks: all three gates stand at 9.5 centimetres, so each step asks you to handle one variable at a time, which keeps practice clear and fixes easy to attribute.


3. The sound of a clipped leg beats any number: right leg means the face was open, left means closed, and passing through but drifting means the path was cutting across, with no camera, device or second pair of eyes needed.


4. Aluminum plates that stand, red bases that hold: two millimetre frames do not take a set when a ball clips them, and two 20 gram red bases per gate drop the center of gravity to ground level so the gate stands on grass, mats and carpet.


5. Push it in and putt, pull it apart and go: legs seat into the bases with no tools, and the whole set comes apart into a flat stack of about a hundred and seventy-five grams that fits a golf bag side pocket.


How to Use (5 steps)

Step 1 - Assemble. Push both legs of each gate into the 1.3 cm sockets of its red bases and press until seated. No tools needed. Three gates, six bases, one set.


Step 2 - Choose a step. Start with L at 7 cm to build confidence, move to M at 6 cm once it is reliable, and finish with S at 5 cm. Do not skip steps, because the gradient itself is part of the training.


Step 3 - Position for start-line work. Stand the gate about 0.3 m, one foot, directly in front of the ball with the opening centred on the target line. Roll putts through the middle without touching a leg. As it becomes reliable, move the gate further out and step down one size, which trains a square start line.


Step 4 - Shrink the hole for break putting. Stand the gate directly in front of the cup or target to physically reduce it. The ball only counts if it passes through the gate and into the hole. This compresses the margin to its limit and brings practice pressure close to on-course pressure.


Step 5 - Combine and compete. Line all three gates up to check that the whole path is square and send the ball through in sequence. Or place three gates in front of the cup and putt through all three before the ball drops, which trains break reading. Or, like croquet, set the three gates in different positions, send the ball through each in turn until it returns to the start, record the total number of strokes, and beat that record next session.

Golf Putting Gate Training Set

69,00 US$Precio
Cantidad

    More Products

    Stay informed, join our newsletter

    Thanks for subscribing!

    bottom of page