SwingPerfect Golf 2-in-1 Rotatable Putting Rail with Stance Board.Two foundations of putting, one system: the Rail straightens your line and amplitude, the Stance Board locks your posture and ball position. When both are fixed, every putt starts from the same place — and finishes where you aimed.
 
"Straighten the line. Lock the stance. Putt like the same person every time." 
"Two foundations of putting, one system." 
"Direction and posture — the 2-in-1 way."
 
1. 2-in-1 System — Direction + Stance in One Complete Loop The Rail (360° rotatable dual-sided putting rail) governs the target line and stroke amplitude; the Stance Board governs posture, ball position, and backswing arc. Combined, they form a complete training loop: direction calibration → stance fixing → unified ball position → ball-path feedback. Each piece also works standalone — 1 set replaces 3 tools (direction, stance, and chipping alignment).
 
2. 360° Rotatable Rail — 78.7cm Long Line + Full-Direction Rotation The dual-sided rail creates a 78.7cm linear reference on the target line to judge whether your line is truly straight; the dual-sided design also controls back/forward amplitude. Insert one locating pin through the small hole above the ball-position hole into the green or synthetic turf, then flick either end of the rail to rotate 360° in place — aim at different targets without repositioning. Straight, breaking, and side-slope putts in one setup. Left & right handed.
 
3. Stance Board — Locked Ball Position + Backswing Arc Control 18cm long, 4.6cm wide, usable from either end: the front-end marker fixes your ball position every single stroke; the board length serves as a backswing arc reference — keep the backswing within the board and amplitude stays consistent. It also transforms into a T-shape chipping alignment tool: place the ball in front and the board calibrates your chipping stance and ball position.
 
4. Perception Bias Correction — Find the Position That "Looks Straightest" If you believe the reference line points left, you naturally aim right to compensate — this false perception compensation is a common root of missed putts. Optimize your setup (distance to ball, neck bend, ball position) to find where the line looks straightest — the rail immediately reveals your ideal address position. With long-term use, you judge correctly even without the rail.
 
5. Instant Ball-Path Feedback — Face / Strike Problems in Seconds Whether the ball rolls straight is clearly visible along the rail: face closed or heel strike = ball drifts left; face open or toe strike = ball drifts right. Start-line error must stay within 0.75 degrees for a straight roll — know exactly what happened at impact and correct it directly.
 
6. Natural Carbon Fiber Finish — Featherlight, Line-True Both pieces are just 0.2cm thick in natural carbon fiber (no colored coating) — the ball rolls from the rail to the ground with almost no change to its line. Light, high elastic toughness, high tensile strength, moisture- and heat-resistant, deformation-free for a long service life indoors and outdoors.
 
7. 18 Practice Tees Included + Sleeve — Ready to Play Comes with 18 putting practice tees and a sleeve pack (81×7cm, 242g total) — everything needed for a complete session, bag-ready.
 
8. OEM Ready — MOQ 100 Pieces Custom branding and OEM orders welcome with a minimum of 100 pieces — ideal for golf retailers, teaching academies, and practice facilities.
 
How to Use
① Combined Training (Recommended) — Direction + Stance in One Setup
Lay the rail flat along the target line pointing at the hole or target center.
Place the stance board across your stance position between the feet, front-end ball marker aligned with the ball position.
Stand with feet on either side of the board; place the ball at the front-end marker.
Set up and check in order: stance line parallel to the target line (board reference) → ball position fixed (front marker) → neck bend → rail center line pointing straight at the target.
Putt along the rail and read the ball path — build a unified address where posture is fixed and direction is straight.
 
② Rail Standalone — Straight-Line Calibration + Multi-Angle Rotation
Lay the rail flat along the target line pointing at the hole or target center.
Place the ball at the ball-position hole; set up and check whether the rail's center line points straight at the target — if it looks left/right, adjust in order: distance to the ball, neck bend, ball position.
Putt along the rail and watch whether the ball rolls straight — correct immediately.
Multi-angle: insert one locating pin into the small hole above the ball-position hole into the ground; flick either end of the rail to rotate to any target direction; putt continuously at multiple directions (start at 12 o'clock, rotate 30-45° each time, change distance after a full circle).
 
③ Stance Board Standalone — Ball Position + Backswing Arc Control
Lay the board flat at the ball position, front-end marker aligned with the ball (either end works).
Confirm ball-to-marker alignment before every stroke for a consistent ball position.
Use the 18cm board length as a backswing arc reference: keep the backswing within the board for consistent amplitude.
Chipping/swing drill: place the ball in front — the board becomes a T-shape alignment tool for chipping stance and ball position.
 
④ Advanced Combo Drills
Pair with cups, gates, direction strings, and other aids to build a complete training system.
After putting is dialed in, use the stance board for chipping ball position and posture — short game improves together.
With long-term use, maintain correct stance, ball position, and aim even without the tools.