SwingPerfect Golf Large Carbon Fiber Square Face Putting Board Trainer. A square face is the invisible 1° that decides whether putts drop. This board makes that degree touchable: edge-aligned calibration plus a Tee-gate that grows tighter as you improve — until squareness lives in your hands, not your hopes.
 
"The invisible 1° — now touchable."
"Square the face, feel the gate, make the putt."
"One board. Three difficulties. A lifetime of square putts."
 
1. Square-Face Calibration — Stop the Left/Right Drift Press the putter face against the board's alignment edge — any tiny open or closed angle is instantly "felt." A 1° face error, invisible to the eye, is caught the moment it happens; in real play, 1° of face deviation can push a 3m putt 5cm off-line and past the edge of the cup. Studies show face direction determines about 75-80% of the starting line — the board trains the biggest variable first.
 
2. Tee-Gate Progressive Difficulty — From Beginner to Pro on One Board Four long slots per side accept tee gates; the narrower the gap, the harder the drill. Wide mode (~16-18cm) for building basic face awareness → medium (~10-14cm) for advancing players → narrow (~6-9cm) for pro-level precision. Keep both backswing and follow-through clear of the tees = square pass; touch a tee = instant correction signal. (Tees not included.)
 
3. Large 18.6cm Board — Fits Every Putter Face About 60% wider than standard small boards — mallet, blade, and wide-body putter faces (mainstream ~9-16cm) all fit fully on the board with no overhang. More face travel room for wider stances and larger stroke arcs. Left & right handed.
 
4. Instant Tactile Feedback — Know the Error the Moment It Happens If the head drifts and touches a tee during the stroke, your fingertips feel it immediately — no coach needed. The tool is its own tactile reminder: every touch is a zero-latency correction signal. Tactile feedback finds errors 3x faster than visual review, with far higher correction efficiency.
 
5. Carbon Fiber Featherlight — 110g, Bag-Ready Compression-molded carbon fiber, just 0.5cm thick, 110g — lighter than a phone. White leather sleeve (21×11cm) included; total 170g. Slips into a bag side pocket; 30 seconds to set up for a pre-round warm-up.
 
6. The Basic Building Block of Putting Practice Positioned as the foundation accessory of putting training: pair with cup mats, direction circles, direction strings, and aiming circles to build a complete system — one board + cup/direction string = a full direction + squareness dual-dimension training setup.
 
7. OEM Ready — MOQ 100 Pieces Custom branding and OEM orders welcome with a minimum of 100 pieces — ideal for golf retailers, teaching academies, and practice facilities.
 
How to Use
Basic — Square-Face Calibration
Lay the board flat on the ground or mat, U-shaped notch facing you (for head entry).
Place the ball in the central U-shaped ball-position notch — stable, no rolling.
Grip normally (mirror for lefties), press the face against the board's long edge, parallel to it — that is square.
Address normally, keep the square-face feel, and strike gently — the ball rolls along the target line.
Read the ball path: straight = square success; left = face closed at impact; right = face open at impact. Repeat until square becomes natural.
 
Advanced — Tee-Gate Training (tees not included)
Insert tees into the side slots; first session, place them at the outermost (widest) position for a loose gate.
Putt normally: no tee contact through backswing and follow-through = square pass; tee contact = immediate feedback, adjust.
After 10 consecutive clean passes at wide spacing, move the tees inward one slot to narrow the gate.
Repeat narrowing until the gate reaches your target challenge — progressive tightening is the board's core design.
 
Combos — With Other Aids
With cup mats: board fixes ball position and direction; the cup mat is the target — train squareness and holing together.
With direction circles: place the circle at the target, push from the board into the circle — direction + squareness calibrated simultaneously.
With direction strings: stretch a string between board and target; the ball rolling along the string line = correct direction.
With aiming circles: place at the target for a complete squareness → direction → holing loop.
 
Notes
Start with wide gate spacing; building correct perception matters more than jumping to hard difficulty.
The carbon board is thin — avoid heavy bending or sharp scratches; store in the sleeve after use.
Tees are not included in international shipment.