SwingPerfect Golf Putting T Alignment Tool 39.6cm Rotatable Carbon Fiber. Your eyes naturally lie about target alignment at address. This 39.6cm long arrow carbon guide magnifies subtle aim errors into obvious offsets, locking in target direction and face squareness simultaneously.
● "39.6cm long arrow guide: catch address aim errors before you stroke."
● "Target line + square face dual calibration: two essentials in one setup."
● "34g featherlight carbon fiber: static lock + 360° turf rotation for any green."
1. 39.6cm Extended Arrow Centerline (Magnifies Aiming Error): More than twice the length of compact aligners; the extended linear guide makes angular deviation glaringly obvious, keeping start-line roll within 0.75°.
2. Dual-Reference Crosshair System (Target Line + Square Face): Extended stem verifies straight line to the cup, while the perpendicular crossbar squares your putter face at impact—unifying two crucial variables in one address.
3. Dual-Mode Setup (Tee Anchor + 360° Turf Swivel): Lock into static alignment using 2 tees in lateral slots, or anchor via metal pins to rotate 360° across sloping greens without lifting the guide.
4. Ultra-Thin 0.2cm Carbon Fiber (34g Featherlight Build): Precision laser-cut from high-grade carbon fiber; lays totally flat on green grass, allowing the ball to roll off onto the turf with zero deflection.
5. Includes Tailored T-Shape Leather Travel Sleeve: Custom-molded protective leather pouch shields the tool in golf bags; complete kit weighs only 153g for effortless travel.
6. OEM Ready — MOQ 100 Pieces Custom branding and OEM orders welcome with a minimum of 100 pieces — ideal for golf retailers, teaching academies, and practice facilities.
How to Use
Mode 1: Tee-Fixed Static Alignment Calibration
Lay the T-tool flat, long-arm arrow tip pointing at the hole or target center, ensuring the center line aims at the target.
Insert 2 tees into the crossbar slots on both sides to lock the tool against shifting — static precision mode.
Place the ball at the ball-position hole where arrow and crossbar meet; the crossbar scale helps confirm ball position and stance distance.
Set up and check whether the long center line points straight at the target — if it looks left/right, adjust in order: distance to the ball → neck bend → ball position, until it "looks" straight.
Putt along the center line: on-line = correct; left = face closed or heel strike; right = face open or toe strike.
Mode 2: Face-Square Calibration (with tee fixing)
After address, use the perpendicular crossbar reference on the ball side to adjust face angle until the face is perpendicular to the target line.
Verify with the ball path after impact, gradually building correct face perception and muscle memory.
Mode 3: Locating-Pin Rotation · 360° Multi-Angle Drill
Remove the tees, insert one locating pin through the small hole above the ball-position hole, and press it into the green or synthetic turf.
Rotate the T-tool in place around the pin to any target direction, arrow pointing at the new target.
Putt continuously at multiple directions to build aiming perception across angles and slopes — no repositioning needed.
Start at 12 o'clock, rotate 30-45° each time; after a full circle, change distance and continue for systematic all-angle perception.
Advanced Combos / Extensions
With colored aiming circles: place the circle at the target, aim the arrow at its center for added visual challenge and precision.
With clock cup mats: aim at each clock-position cup in sequence to systematically practice every entry angle.
With direction strings and gates: build a fully supervised practice channel for higher precision.
With long-term use, muscle memory keeps your aim correct even without the tool — perception bias corrected at the root.
Notes
For indoor synthetic turf and real greens; on hard surfaces, place a thin pad underneath to protect the carbon fiber edges.
Avoid bending or hard impacts; store in the included sleeve after use.
