SwingPerfect Golf Putting Chipping Carbon Fiber T Shape Training Aids. Two modes, one tool: lay it flat to lock your line and stroke length, tuck it under your arm to lock your swing triangle. Direction, posture, and tempo - fixed on a standard you can feel.
 
"Two modes, one standard - lock the line, lock the triangle."
"Feel the standard, not the guesswork."
"Putting or chipping, the T has you covered."
 
1. Dual-Mode Design — One Tool, Two Core Putting Dimensions Ground mode: direction + stroke-length training. Under-arm mode: posture + body-linkage training. Switch freely between modes — 1 set replaces 2 tools, covering both pillars of putting skill without buying extra equipment. Indoor and outdoor.
 
2. Ground Training — Line, Stance, and Stroke Length Locked at Once Lay the T flat on the ground: the crossbar guides your target line, the vertical bar locks your stance line, and the red cylindrical bars slide freely along the slots to frame the upper and lower limits of your stroke — turning "feel-based" stroke length into fixed increments. Consistent amplitude, consistent distance. Advanced drill: remove the cylinders and use the bare T-frame as a pure direction guide for higher difficulty.
 
3. Under-Arm Training — Lock the Golden Swing Triangle Tuck the crossbar under your armpit with the vertical bar along the grip — keep the shoulder-arm-club triangle intact through the stroke. If the crossbar flies outward mid-swing, that's a wrist flip or elbow bend — correct it immediately. Built on the same principle as pro coaches' "one stick" training, rebuilding muscle memory from the root. Works for both putting and chipping.
 
4. Carbon Fiber Precision Build — Featherlight, Built to Last Two high-strength carbon fiber plates assembled into a standard T with red metal screws — fine woven texture with a premium pro-tool feel. The complete assembly weighs just 100g — about 40% lighter than traditional metal training stands — while carbon fiber resists fatigue and stays deformation-free through years of use. Anodized aluminum red parts: rust-proof, wear-resistant, rock-solid when tightened.
 
5. Fits in Your Bag — 1-Minute Assembly, Zero Load Screw-assembly design: assemble or disassemble in about 1 minute. Comes with a dedicated leather sleeve (70.5×8cm) — the disassembled set slips into your bag's side pocket. Total carry weight just 212g.
 
6. Indoor & Green — Practice Anytime, Anywhere Morning indoor mats, weekend practice green, pre-round warm-up — two minutes to set up, and the standard comes back before the first putt.
 
7. Left & Right Handed — Universal Fit Designed for both-handed players — beginners, amateurs, and competitive golfers.
 
8. OEM Ready — MOQ 100 Pieces Custom branding and OEM orders welcome with a minimum of 100 pieces — ideal for golf retailers, teaching academies, and practice facilities.
 
How to Use
Mode 1: Ground Putting Drill (Stance + Direction + Stroke Length)
Assemble: join the vertical board and T-joint board with 2 sets of red screws into a T shape.
Place: lay the T flat, crossbar in front of the ball position pointing at the target (hole direction), vertical bar parallel to your stance line; stand with feet on either side of the vertical bar.
Adjust: insert the red cylindrical bars into the crossbar slots and slide them left/right to your stroke length as backswing/follow-through limit references.
Drill: place the ball just in front of the T intersection, putt with a normal stance; the two cylinders frame your stroke amplitude.
Advanced: remove the cylinders and keep only the T-frame as a direction guide for higher difficulty.
 
Mode 2: Under-Arm Drill (Body Linkage + Posture Correction)
Tuck the crossbar under your armpit (inner upper arm), vertical bar along the grip, grip with both hands.
Putt normally, keeping the T pressed against both arms — it must not fall or shift.
If the crossbar flies outward during the swing, that's a wrist flip or elbow bend — adjust immediately.
Practice consistently until muscle memory forms; then putt without the T keeping the same linkage. Works for chipping and putting alike.
 
Assembly / Disassembly
Assemble: join the two carbon fiber boards with the interface screws into a T, insert the red cylinders — about 1-2 minutes.
Disassemble: unscrew in reverse, store both boards in the sleeve, lay flat in your bag's side pocket.
Clean: wipe carbon fiber with a dry cloth; wipe aluminum parts with a damp cloth and air-dry.